Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Delray Beach
If your roof is at the end of its life in Delray Beach, you don’t need a pitch – you need a straight answer about what’s actually failing and what it costs to fix it properly. We serve Delray Beach and the surrounding barrier island and western communities, and we know that a roof east of the Intracoastal lives a very different life than one near Kings Point. Our technicians have up to 9 years of experience, and we’ll tell you plainly whether your roof needs a full replacement or a targeted repair. Call (888) 361-4813 for a free estimate.
Why Delray Beach Homeowners Call Rutherford Roof Repair for Roof Replacement
The reason people call us is baked into our name: repair-first. Our Roof Replacement service exists for the times a fix genuinely won’t buy you enough years – and proving that is our job, not a sales pitch. An inspection comes first, every time, and if your current roof has life left in it, we’ll say so. If a hurricane-season wind failure has left you no choice, we move to replacement with material you choose from seven leading brands rather than a single take-it-or-leave-it shingle.
Delray Beach is our primary market and our customers there are a knowledgeable crowd – they read the bids, they ask about fastening specs, and they’re right to. When you’re comparing contractors, we’ll walk you through exactly what our written line-item quote covers: decking, underlayment, flashing, hardware and labor. That means people near Pineapple Grove and out toward High Point get the same clear breakdown. Trust is earned by showing the work, so the inspection is a no-commitment step before any paid job begins. Call (888) 361-4813 to schedule yours.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Flat Roof Replacement in Delray Beach
Flat Roof Replacement in Delray Beach comes down to membrane choices and water management, and the coastal version of the job is where homeowners get caught out. Low-slope sections on mid-rise condos and rear additions around Swinton Avenue and the beach blocks take standing water hard during the near-daily summer downpours, so drainage and a secondary water barrier matter more than a pretty surface. A typical flat roof replacement in Delray Beach runs roughly $4,500 to $9,500 for a standard low-slope section, though the coastal-spec version with upgraded fastening and flashing sits at the higher end.
Drainage and Membrane Choices
We look at scupper and drain placement before we talk membrane, because a flat roof here fails at the edges first. Membrane selection follows the slope, the parapet detail and how much afternoon water it has to shed.
Flashing at the Wall Line
Where a flat roof meets a sloped section or a wall, salt air attacks the metal fastest. We specify the flashing detail to suit that exposure, not the cheapest catalogue option.
Roof Installation in Delray Beach
Roof Installation in Delray Beach covers both new construction and full tear-off replacement on existing homes, and the two jobs diverge sharply depending on where you sit east or west. Out west in Kings Point, High Point and Palm Greens, thousands of near-identical barrel-tile and shingle roofs went on in the same construction waves, so they now fail on the same schedule – and an HOA-specified tile re-roof is a production job about matching tile profile and color across a whole community. Downtown near the beach, the work is cottage-by-cottage and preservation review often shapes what you can install. A typical roof installation in Delray Beach runs about $12,000 to $28,000 for a full re-roof on a single-family home; new construction and large tile roofs sit above that range.
HOA-Spec Tile Re-Roofs
West-side communities often require a specific tile profile and color through the HOA. We match what’s approved rather than arguing for what’s easy to order.
Decking and Underlayment
On older homes we open the roof and inspect the decking before deciding what gets replaced. Rotted decking found under a barrel-tile field changes the scope, and you’ll see it on the written estimate before work starts.
Trusted Brands We Service in Delray Beach
We work with GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko and Boral, which means a Delray Beach homeowner isn’t boxed into one shingle or tile line. That breadth matters most on Mediterranean-revival and barrel-tile roofs, where Boral tile matches a profile while CertainTeed or Owens Corning architectural shingles handle a cottage or inland subdivision. We don’t stock parts – the material is ordered to the job and the specification – but that breadth lets us turn a quote around quickly. Premium, value and specialty tiers are all on the table, and the recommendation follows your roof, not the highest-margin product.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Delray Beach Homes
- Rusted tile fasteners and corroded valley metal. East of the Intracoastal, salt spray eats carbon-steel hardware years before the tile itself shows wear, so a roof that looks intact from the street can be failing underneath.
- Wind-uplift failure traced to the nailing pattern. Hurricane season tests the fastening spec more than the shingle, and an architectural shingle rated to 130 mph only performs when the installer follows that spec.
- Aging original asbestos-cement shingle downtown. Many 1920s – 1950s cottages around Swinton Avenue still carry it, and removal and disposal protocols, not installation, drive the cost and timeline.
- Corroded flashing at penetrations and valleys. On Mediterranean-revival and barrel-tile roofs, near-daily summer downpours find a path under the tile wherever the flashing has rusted through.
Pricing for Roof Replacement in Delray Beach, FL
Replacement pricing in Delray Beach splits along the Intracoastal, and that’s the honest way to explain it. A full asphalt shingle re-roof on a single-family home runs about $12,000 to $22,000, while a barrel-tile or flat-roof job sits from $18,000 to $28,000 and up depending on scope. New construction and specialty tile sit above those ranges. What moves the number most: tear-off and disposal, including asbestos-cement protocols on old cottages; decking replacement; and the hardware specification – stainless or hot-dip galvanized fasteners, new drip edge and sealed penetrations cost more than carbon steel up front. That’s the coastal-versus-inland gap, and we quote it line by line so you can see it. Estimates are free, and the written estimate sets the final price. Call (888) 361-4813.
We Also Serve Cities Near Delray Beach
We work throughout the surrounding area, including Boca Raton, Delray Beach, Pompano Beach, Palm Beach and Fort Lauderdale. Salt exposure on the barrier island and along the coast shapes material recommendations in all of them, and we’ll give you the same line-item written estimate wherever you are. If you’re just outside Delray Beach proper, call and we’ll confirm coverage for your address.
Serving Delray Beach, FL – Our Local Coverage Area
We serve Delray Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Delray Beach
East of the Intracoastal, salt-laden air corrodes tile fasteners, valley metal and flashing years before the tile itself fails, so a beachside re-roof is often a hardware and underlayment job rather than a tile job – while the same-age roof a mile west of Federal Highway is often still sound. The west-side communities fail differently: identical roofs installed in the same construction waves age and fail together, usually driven by wind and sun rather than salt. Calling (888) 361-4813 gets you an inspection that tells you which pattern yours fits.
In many cases yes – several buildings in the Swinton Avenue and Pineapple Grove districts sit under historic-preservation review, and a change in roof material can require approval before work starts. We help you identify what your building’s review status likely means for your material choices, and you should confirm the specifics with the city before signing off. Call (888) 361-4813 to talk through the downtown options.
For beachside work east of the Intracoastal, we specify stainless-steel or hot-dip galvanized fasteners, upgraded valley metal, new drip edge and sealed penetrations – hardware that resists salt spray rather than the carbon-steel default. Inland, the standard specification holds up far longer, though we still recommend galvanized fasteners where exposure is high. Your written estimate shows which specification applies. Call (888) 361-4813 for a quote.
The rating is only as good as the fastening spec – architectural shingles rated to 130 mph perform to that level when the nailing pattern and fastener type are installed as specified, not just when the shingle is unrolled from the bundle. Hurricane season puts that to the test here, and a cheap installation shortcut is where failures show up first. Ask for the fastening spec in writing; call (888) 361-4813 and we’ll walk you through it.
Ask what hardware is specified (stainless or hot-dip versus carbon steel), whether the price includes decking replacement if rot is found, what underlayment and secondary water barrier are used, and whether the quote is a fixed line-item price with no change orders. That comparison usually explains a price gap of several thousand dollars between bids that look identical on the front page. Call (888) 361-4813 for a free written estimate you can compare against.
Written by the team at Rutherford Roof Repair.