Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Pompano Beach?
Metal roof installation in Pompano Beach typically costs between $14,000 and $38,000 for a standard single-family home, depending on the metal type, roof size, and complexity. Most Pompano Beach homeowners land somewhere around $22,000 to $28,000 for a standing seam or metal shingle system on a 1,600 to 2,200 square foot roof. The written estimate we provide after inspecting your roof sets the final price, and it’s free.
Metal Roof Installation Cost Breakdown (2026)
Here’s what the major line items run in the Pompano Beach market right now. These are estimated ranges, not a quote – the only number that matters is the one on your written estimate.
| Line Item | Typical Range |
|---|---|
| Standing seam metal roof (installed) | $16,000 – $38,000 |
| Metal shingle roof (installed) | $12,000 – $24,000 |
| Corrugated / exposed fastener panels (installed) | $9,000 – $18,000 |
| Per square (100 sq ft) – material and labor | $750 – $1,400 |
| Tear-off and disposal of existing roof | $2,500 – $6,500 |
| Underlayment (high-temp synthetic) | $1,200 – $3,000 |
| Ridge, hip, and valley detailing | $800 – $2,500 |
| Flashing at penetrations and walls | $400 – $1,200 |
| Skylight re-flash or replacement | $350 – $900 each |
Standing seam costs more up front because the panels are formed to length and the seams are raised and hidden-fastened, which takes more labor and precision. Exposed-fastener corrugated panels sit at the low end, but the fasteners themselves become the maintenance point over the years. Metal shingles fall in between and give you a look closer to traditional roofing while still delivering metal’s lifespan. Which one makes sense for your house depends on the pitch, the shape of the roof, and what you want it to look like from the street.
What pushes the number up: a steep or cut-up roof with multiple planes and valleys, a second story that needs staging, decking that’s soft or rotted and needs to be replaced before the new roof goes on, and heavier-gauge metal. What pulls it down: a simple gable roof, an existing roof that can be re-covered in some cases, and choosing a lower-tier panel profile.
What Affects Metal Roof Installation Pricing in Pompano Beach
- Roof size and pitch. A 1,400 square foot ranch with a walkable pitch is a different job than a 2,800 square foot two-story with a steep slope. Every additional plane and valley adds cutting, seaming, and flashing time.
- Metal type and profile. Standing seam is the premium option, metal shingles sit mid-range, and corrugated panels bring the entry price down. The gauge of the steel also matters – heavier gauges cost more but resist denting and oil-canning better.
- Decking condition. Metal panels need a solid substrate. If the decking under your existing roof is soft, warped, or has been wet, it gets replaced before anything else goes down. That’s a line item, not a surprise we spring later.
- Sun exposure and heat. Pompano Beach roofs take a beating from the summer sun. A high-temperature synthetic underlayment isn’t optional here – standard felt breaks down fast under metal that gets hot. We build that into every metal quote.
- Rain intensity and drainage. South Florida’s afternoon downpours are heavy and fast. Panel layout, valley width, and gutter capacity all have to be sized for that kind of volume, which can add detailing cost on complex roofs.
- Permits and inspections. Most cities require a permit for a full roof replacement. Ask your city’s building department what Pompano Beach requires and factor the permit cost into your budget.
One thing worth saying plainly: metal isn’t always the answer, and we say so. If your existing shingle roof has years of life left and the issue is a leak at one valley or a failed pipe boot, a repair makes more sense than spending five figures on a new roof. That’s why every metal quote starts with an inspection. The inspection is free, and if repair is the honest call, we tell you that before we ever talk price.
How to Save on Metal Roof Installation
Metal roofs cost more up front than asphalt shingles, but there are legitimate ways to keep the number down without cutting corners that bite you later.
- Get an inspection before you commit to replacement. Some roofs that look finished are one repair away from years more life. If a targeted repair solves the problem, that’s the cheapest metal roof job you’ll ever do – because you don’t do it.
- Choose your panel profile deliberately. If the look of standing seam isn’t essential, a quality metal shingle or corrugated system saves real money while still delivering metal’s durability. We carry options from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral so the material fits the budget rather than the other way around.
- Handle repairs around the roof at the same time. If you’re already paying for tear-off, replacing a rotten fascia board or a failed step flashing during the same job costs far less than a separate crew visit later.
- Fix small problems before they grow. A leaking pipe boot or a cracked vent flashing left alone can rot decking, and rotted decking adds to every roof job. Catching it early keeps the metal install quote from climbing.
- Get more than one estimate. Not the cheapest one – the one that’s itemized enough that you can compare line by line. Free estimates from us give you that breakdown. Call (888) 361-4813.
We repair first. Replacement is only recommended when it’s genuinely the right answer, and metal is a long-term decision worth getting right the first time.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost in Pompano Beach?
Most Pompano Beach homeowners pay between $14,000 and $38,000 for a full metal roof installation, with the typical range landing at $22,000 to $28,000 for a 1,600 to 2,200 square foot home. The final number depends on panel type, roof complexity, and decking condition. Call (888) 361-4813 for an exact quote – estimates are free.
Is it cheaper to repair or replace a metal roof?
A targeted repair almost always costs less than a replacement – typically a few hundred to a couple thousand dollars versus five figures – but it only makes sense if the panels and structure underneath are sound. If the metal is perforated or the fasteners are failing across the whole roof, repair won’t last. An inspection tells you which situation you’re in. Call (888) 361-4813 and we’ll look before we recommend.
What is the cost per square foot for metal roofing in Pompano Beach?
Metal roofing in Pompano Beach runs roughly $7.50 to $14 per square foot installed, which works out to $750 to $1,400 per square (100 square feet). Standing seam sits at the top of that range; corrugated panels sit lower. Call (888) 361-4813 for a free estimate based on your actual roof.
Can you install a metal roof over an existing roof in Pompano Beach?
Sometimes, yes – but it depends on local code and the condition of the decking underneath. In many cases a full tear-off is required, which adds $2,500 to $6,500 to the job. Ask your city’s building department, and we’ll tell you what we find during inspection. Call (888) 361-4813 to schedule one.
Does a metal roof raise home value or lower insurance in Florida?
A metal roof can support resale value and may earn insurance credits depending on your carrier’s rules, though we don’t quote insurance figures – ask your insurer directly. What we can tell you is that metal lasts significantly longer than asphalt in the South Florida sun. Free estimates at (888) 361-4813.
Why Start With an Inspection
Metal roof installation is a big purchase, and the inspection is the honest first step. Our technicians have up to 9 years of experience, and metal is a material where the details at the penetrations and the valleys are what decide whether the roof performs for its full service life or fails in the first heavy summer rain. Before we quote a metal roof, we get on the roof, check the decking, look at every flashing detail, and give you a straight read on whether repair or replacement is the right call. If it’s a repair, we’ll say so – that’s the whole point of the name.
We work with seven leading brands across every price tier: GAF, CertainTeed, and Owens Corning at the premium end, IKO and Tamko for value, Atlas in the mid-range, and Boral for specialty and tile-look options. One honest recommendation based on your roof, not our margin.
Get Your Free Estimate
Call (888) 361-4813 for a free estimate on metal roof installation in Pompano Beach. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you’re weighing a full metal roof against a repair, comparing panel options, or just want an honest look at what your roof actually needs, we’ll walk you through it with no pressure and no commitments. Your roof may need less than you think – let’s find out before we talk price.
Pricing reflects the Pompano Beach market as of 2026. Rutherford Roof Repair offers free estimates – call (888) 361-4813.
Written by the team at Rutherford Roof Repair.
What Our Customers Say
"Quality work on the repair. There were a few nails left in the driveway that the magnet missed, so check yours before driving over it. Otherwise no complaints."
- Reggie Prince"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
- Todd Sutton"Went up in the attic first with a flashlight before going on the roof, which no other estimator bothered to do. Found the stain and worked backward from there."
- Andres Castillo